Portfolio
Instruments that play, printed and engraved objects, consoles brought back to life, software and games: work born on the same bench, in Taranto, from the idea to the finished object.
-
2 photos
Instruments
Eremo
The synthesizer that plays by itself and never hits a wrong note.
Switch it on and it starts: a soundscape that slowly changes and always stays consonant. Ten atmospheres, from Night to Forest, a five-voice drone, tape echo and reverb; on the round display the wave moves like on an oscilloscope.
Inside there is a Teensy 4.1 with firmware written for it. Outside, a laser-engraved plywood panel with gothic lettering and a 3D printed box: four knobs and two keys are all it takes to play it.
-
4 photos
Instruments Open
Ichosynth
A groovebox to build with your own hands, born for a workshop.
Sampler, synthesizer and step sequencer on a 256-LED grid: every row is a voice, every column a step. It is the TŒRN groovebox by SP_ rebuilt with common parts, with no custom circuit boards.
It was born for ICHOS 2026, in Taranto: every participant soldered and assembled their own. That is why it has manuals in Italian and English, a wiring guide drawn part by part, a case that prints in three pieces and an emulator to try it before soldering.
-
4 photos
Instruments Open
Stame
One key, a full chord: the instrument that lets harmony play.
One hand picks the chord type, the other the note: Stame adds bass, rhythm and, if you like, an ambient bed that almost plays itself. 232 sounds, 43 drum kits, a looper, all written in C for a small handheld console.
Keyboard, key pad and console sit in a single case, designed to measure and 3D printed in three colours, in trays that fit together without glue. Software, manual and case design are public.
-
Instruments
EtherVox Armsonic
A granular theremin: you play the sound with your hands in the air.
Like a theremin, it is played without touching it; but instead of the classic whistle there is granular synthesis, which breaks the sound into grains and puts them back together. Knobs set frequency, sync and decay; a screen shows the scale in use, such as the pentatonic.
The front is laser-engraved wood, with the name and legends drawn for it; the two side blocks are 3D printed.
-
Instruments
Mutant Synthesizer
A synthesizer you breed: species, population, mutation.
At the centre there is a matrix of 64 LEDs; around it, knobs that are not called «filter» or «volume» but species, population, lifespan, mutation. The sound is born, grows and changes like a small ecosystem.
The panel is plywood, laser cut and engraved, with a pattern of holes echoing the LEDs; the sloped case is 3D printed.
-
2 photos
Laser
Arcade cabinet
An arcade in the living room, built from scratch.
A full-size cabinet with a Back to the Future theme: a bartop with screen, two joysticks and lit buttons, on a stand with S-shaped sides. The control panel echoes the DeLorean's time circuits.
It is a job that brings the whole bench together: the laser-cut cabinet, the artwork designed and printed, the software that launches the games, the electrical and electronic work for buttons and lights, and 3D printed parts where needed.
-
4 photos
Consoles
Restored handheld consoles
Thirty-year-old Game Boys, with a screen that did not exist back then.
Game Boy and Game Boy Color taken apart down to the last screw: an OLED screen in place of the original, a new speaker, new shell and buttons. They work again and look better than when they were in the shop.
Every console is one of a kind: white with a strap, purple glitter, red. The same work is done on request, even just for a repair.
-
2 photos
3D printing
Moon pendant lamp
The real Moon, hanging from the ceiling.
A 3D printed sphere with the real topography of the Moon: craters and maria are in relief on the surface. Lit from inside, the light brings them out one by one.
Inside there is an RGB lamp: warm white for every day, or green, pink, orange.
-
3 photos
3D printing
Dummy 13 wall lamp
A robot climbing the wall, with a lamp for a head.
It starts from Dummy 13, an open-source poseable figure: scaled up and modified, with a head that houses the lamp. Printed in gold and grey, it can be posed as you like.
In the evening the RGB lamp casts the long shadows of the legs on the wall, and changes colour.
-
6 photos
3D printing
Figures and models
From the file to the model on the shelf.
Droids, walkers, starfighters, poseable figures: models printed with fine details, readable panels and engravings, joints that move.
Some stay in the colour of the filament, others are finished and painted. They are printed on request, in the size and colour needed.
-
3 photos
3D printing
Lattice and wire sculptures
Shapes that exist only because they can be printed.
A skull and a piggy bank made of Voronoi cells, a torso drawn by a wire of triangles: objects more empty than full, impossible to make with a mould.
They are also a test bench for the printer: thin walls, bridges and overhangs at the limit, metallic finishes.
-
2 photos
3D printing
Made-to-measure parts
The part you can no longer find, remade from a tape measure.
A broken or unobtainable spare part is measured, redrawn and printed: if it does not fit first time, the model is corrected and printed again.
Everyday objects are born the same way: desk organizers, stands, cases, designed for the space and for the things they must hold.
-
Software and games
Ctrl-Alt-Revenge
Taranto, 2087: a video game of puppets and cardboard.
A 2.5D action platformer: you run, jump and climb over a city built like a diorama, with characters that move in steps like stop-motion puppets. The hero is GIG, fifty, whose arm has been switched off.
Story, world and characters are written in Taranto and are about Taranto. It is in development in Unreal Engine 5; the game site has GIG's model to turn around and his figurine to print.
-
2 photos
Software and games
This website
A workbench in 3D, with the real weather outside the window.
The home is a room: a bench at night facing the Mar Piccolo, where every object opens a section. In «Live» mode the light follows the real sun and moon, and it rains outside if it is really raining.
It is hand-made in Three.js, with no framework, with a light version for phones; pages are generated by a Python script and checked by dozens of automatic tests at every release.
-
Software and games Open
Cirmolo
A game console that becomes a musical instrument, in Italian.
A system for the Miyoo Flip handheld: an interface entirely in Italian, synthesizers and samplers to play with a MIDI keyboard, and an AI that translates games and suggests what to play.
It is a fork of spruceOS; some of the fixes made for Cirmolo were accepted into the original project.
-
Software and games Open
GB-Tracker Pro
Composing music on a Game Boy Color, note by note.
A four-channel music tracker that runs on a real Game Boy Color: you write notes in a grid and the console plays them with its original chip.
It is written in assembly, the language closest to the machine, and includes a chiptune version of Für Elise.
Photos of the work, retouched with artificial intelligence for background and light.
Open by choice.
Work marked Open is public: code, schematics, print files and manuals can be downloaded, studied, rebuilt and improved.
Code and files handed over
Source code and project files are delivered together with the work.
No lock-in
No closed platforms or forced subscriptions: what is built keeps working even without the person who made it.
Open tools
Where a good open alternative exists, that is the one used.
Public projects
Personal projects are published with code, schematics and print files.
A project to start or a process to simplify?
A few lines on what you need are enough: a reply follows within two working days.